This unit has been completely disassembled, inspected, reconditioned, reassembled, and fully testedby an OEM trained technician.
NOTE: This table has the Imaging Attachment (IA Extension).
SEE PICTURES at the bottom of this page.
TECHNICAL SPECIFICATIONS
Base: is cast iron with textured enamel finish. The top is enclosed by a welded, stainless-steel cover that also forms a shroud for the lower portion of the pedestal. A swivel caster and height-adjustable floor lock at each corner are actuated by a single pedal. Both are electrically conductive, conforming with applicable requirements of NFPA's publication, Flammable Anesthetics Code. The base provides comfortable toe space on both sides as well as space to freely insert a flat-blade Mayo stand. The base also contains the hydraulic system. A NFPA-approved patient grounding receptacle is provided at foot-end of base.
Pedestal: includes tabletop lift cylinder and support column with bearing-mounted saddle frame. These are fully enclosed by stainless-steel, telescoping shrouds. Each shroud is one-piece construction to ensure against foreign matter entering the elevating mechanism.
Superstructure: includes bearing-mounted gears for positioning and articulating the tabletop. The frame is cast aluminum finished with textured enamel paint. The superstructure is bearing-mounted to the elevating mechanism. Indicators show degree of lateral tilt and Trendelenburg. Positioning mechanisms are fully enclosed by stainless-steel covers to prevent enmeshment of drapes.
Tabletop: The 20-inch (508-mm) wide tabletop is divided into four hinged sections: head, back, seat, foot. Each section is cast aluminum (back, seat, and foot sections are covered by stainless-steel veneer). Drilled holes are included for the optional radiographic top. Stainless-steel side rails, notched to receive optional accessories, extend the full length. Mounting hardware and a full complement of optional accessories are available.
Please note: These surgical tables are not C-Arm compatible but the I.A. Option can make 2080 partially C-Arm compatible.
Application: This table provides flexible articulated posturing of the surgical patient, assuring maximum operative convenience.
[2080 L, OR table, surgery table, steris, steris amsco]
|
TABLE COMPONENT
|
POSITION STARTING FROM
SUPERSTRUCTURE HORIZONTAL
|
RANGE (in inches)
|
|
Top and Superstructure
|
Top and Superstructure
|
To any point 27 to 45 above floor
|
| |
Trendelenburg (head down) |
0 to 20 |
| |
Reverse Trendelenburg (head up) |
0 to 20 |
| |
Tilt to Right |
0 to 10
|
| |
Tilt to Left |
0 to 10
|
| Head Section |
Raise (from horizontal) |
0 to 90
|
| |
Lower (from horizontal) |
0 to 90
|
| Back Section |
Raise |
0 to 90
|
| |
Lower |
0 to 10
|
| |
Flex |
0 to 15
|
| |
Reflex |
0 to 10
|
Seat Section
|
Flex |
0 to 20 |
| |
Reflex |
0 to 15
|
Foot Section
|
Lower (with seat section horizontal) |
0 to 105
|
Kidney Elevator
|
Raise (from table top level) |
approximately 4.5" (114 mm) |
